"My Tanks" button will bring up the list of your sites after you've made your entries
1. Add your site to “Input Tank Set”
This will be listed in “My Tanks”
2. Press “Low Level Set Point” to add a Low Level Reminder
3. Press and Hold “Low Level Set Point” button to add your name
You can use different names for each site. This is useful for a dispatcher or manager to distinguish who is on duty for that site
“Starting Level” button will show the beginning level and the date it was entered
“Current Level” button will show the calculated current level
“Voice On” checkbox will disable or enable the voice
4. Enter a tank or chemical name under the “tank” label
5. Enter the feed rate under the GPD label
Feed rate can be entered in two ways
a) Enter manually
b) Use the timer with a calibration cylinder
When the timer is done, touch the GPD in the appropriate field, and GPD will be entered automatically
6. Enter the tank level under the “Level” label
The Date and time will be entered into the program
Enter up to 12 tanks per site
7. Uncheck “PopUp” to disable pop up reminders
8. Press “Decimal Places” button to set the desired amount of decimal places for the current tank levels
Add email addresses
9. Press Save and you’re done
This site will now show up in the “My Tanks” list
Press new to clear the fields, and enter a new site
Press and Hold New to delete a selected site from the list
Data that is saved along with site data is Low Level set point, Voice enabled or disabled, pop up enabled or disabled, decimal places, and email address.
When the application is restarted, the last site that was displayed will show on the screen with current levels and Voice annunciation and or pop up alarms, if they were kept enabled.
Tank levels are updated every 60 seconds
A Percent Calculator has been added for some level meters showing only percent
Convert percent to gallons. Press “Show Percent Calculator”
Height to Gallons calculator

Screenshots: